Standalone Printer Setup - Lexmark 7500 Series User Manual

Use the
5 Lexmark N2050 (internal wireless print server) Connect the printer to a wireless network.
6 Duplex cover
7 Power supply with port
LINE port
8

Standalone printer setup

1
Unpack the printer.
To
Note: Not all products come with an internal wireless print
server installed. For more information, see "Ordering paper
and other supplies" on page 141.
•
Print on both sides of the paper
•
Remove paper jams.
Connect the printer to a power source. Plug the power cord
into the power supply at the back of the printer and then into
the wall outlet.
Connect the printer to an active telephone line to send and
receive faxes. The printer must be connected to a telephone
line to receive incoming fax calls.
Note: Do not connect additional devices to the LINE port,
and do not connect a DSL (digital subscriber line), ISDN
(integrated services digital network), or cable modem to the
printer.
8 7
20
1
2
3
6
4
5