Resetting Printer Software To Factory Default Settings; Using The Change Print File Default Settings Submenu - Lexmark 7500 Series User Manual

Use this
Paper Handling
Language
Country
Key Press Tone
Power Save
Block Host Settings
Speaker Volume

Resetting printer software to factory default settings

Windows 2000, Windows XP, or Windows Vista users
1
In Windows Vista, click
In Windows 2000 and Windows XP, click Start
2
Right-click the Lexmark 7500 Series icon.
3
Click Printing Preferences.
4
Click the Save Settings menu.
5
From the Restore section, select Factory Settings (Defaults).
Note: Factory default settings cannot be deleted.

Using the Change Print File Default Settings submenu

1
From the Setup menu, press
highlighted.
2
Press .
3
After changing values, press
Use this To
Paper Handling Specify the size and type of paper loaded. For more information, see "Using the Paper Handling
submenu" on page 63.
To
Specify the size and type of paper loaded. For more information, see "Using
the Paper Handling submenu" on page 63.
Change the language shown on the control panel.
Change the country or region shown on the control panel to your country or
region.
Set the volume of the tone when a control panel button is pressed to either On
or Off. On is the default.
Set the printer to enter a power saving mode at or after a certain time limit.
Allow your system support person to block to prevent individual users on a
network from making printer setting changes using the Printer Setup Utility.
Set the volume of the speaker during a call.
Control Panel Printer.
Settings
or repeatedly until Change Print File Default Settings is
to save these values and exit this submenu.
75
Printers or Printers and Faxes.