Using The Change Scan Default Settings Submenu; Changing The Default Scan Settings - Lexmark 7500 Series User Manual

3
From the Scan Mode menu, you can:
•
Press to preview the job.
•
Press to return to the Scan Mode menu from the preview if you need to change a value.
•
Press or repeatedly to scroll through the menu items or submenu until you reach the one you want
to change.
•
Press or repeatedly to reach the value you want.
4
To go into other menu items and values to make additional changes, continue to use the navigation buttons
( , , , and ).
5
If needed, press
6
Press to start the scan job.
The following table explains the function of each menu item and the one submenu in the Scan Mode menu.
Use this
Scan to
Color
Quality
Original Size
Change Scan Default
Settings

Using the Change Scan Default Settings submenu

1
From the Setup menu, press
2
Press .
3
After changing values, press
Use this To
Color Choose to scan in black and white or color.
Quality Choose a resolution in dots per inch (dpi). Values are Automatic 150 dpi, 300 dpi, and 600 dpi.
Original Size Specify the size of the original document. Values are Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
3 x 5 in., 4 x 6 in., 5 x 7 in., 8 x 10 in., and 8.5 x 11 in.

Changing the default scan settings

1
From the control panel, press
2
Press .
3
If your printer is connected to more than one computer:
a
Press or repeatedly until the computer to which you want to scan is highlighted.
b
Press .
repeatedly to return to the previous menu.
To
Specify the destination of the scan job (where the scanned image is sent).
Specify the color of the scanned image (Color or Black & White).
Adjust the quality of the scanned image based on your choice of dots per inch (dpi)
or automatic values.
Specify the size of the original document.
Access the Scan Default Settings menu. You can specify the values you want
as user default settings for the Color, Quality, and Original Size menu items.
or repeatedly until Change Scan Default Settings is highlighted.
to save these values and exit this submenu.
or repeatedly until Scan is highlighted.
110