General Printing Problem; Ink Low; Out Of Memory; Out Of Paper - Lexmark 7500 Series User Manual

General Printing Problem

You cannot receive a more specific error message because the printer and the computer do not have bidirectional
communication.
To receive a more specific error message, see "Bidirectional communication is not established" on page 176.
To find the problem without establishing bidirectional communication, see "Checking printer readiness" on
page 169.

Ink Low

A print cartridge is almost out of ink.
Install a new cartridge. For more information, see "Installing print cartridges" on page 135.
To order a new cartridge, see "Ordering paper and other supplies" on page 141.

Out of Memory

The printer software cannot obtain enough memory to print.
Try the following:
•
Before sending a document to print, close any other open programs. The printer may print a blank page when
too many programs are open on the computer.
•
Follow the instructions on the error screen. These instructions reduce the amount of memory needed to print.

Out of Paper

1
Load paper.
2
Press to continue printing.
Note: Do not force paper into the printer.

Fixing a printing failure

Follow the instructions on the computer screen.
If the printer still does not print:
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP and earlier, click Start.
2
Click Programs or All Programs
3
Click Solution Center, and then click the Contact Information tab.
.
Lexmark 7500 Series.
204