Lexmark 7500 Series User Manual page 42

The following table explains the function of each submenu or menu item in the Setup menu.
Use this
Paper Handling
Change Printer Default Settings
Change Copy Default Settings
Change Photo Default Settings
Change Print File Default Settings
Change Fax Default Settings
Change Scan Default Settings
Change PictBridge Default Settings Specify the values you want for each of the PictBridge settings and save the
Print Settings List
Network Setup
Once each value is chosen, press
Default Settings Saved appears.
Note: The user default setting remains in effect until you access the menu again, choose another value, and save
it. An asterisk (*) appears next to the user default setting.
To
Specify the size and type of paper loaded.
Specify the values you want for the printer settings and save the values as
the new user default settings.
Specify the values you want for each of the copy settings and save the values
as the new user default settings.
Specify the values you want for each of the photo settings and save the values
as the new user default settings.
Specify the values you want for each of the Print File settings and save the
values as the new user default settings.
Notes:
•
This menu appears only if a media device, such as a memory card or
flash drive is inserted. The device must contain Microsoft Office
documents with no photos.
•
The Print Files Mode menu is automatically selected if you insert a device
containing documents with no photos.
•
The Photo Card Mode menu is automatically selected if you insert a
device containing photos. (The device may also contain documents, but
must contain photos.)
Specify the values you want for each of the fax settings and save the values
as the new user default settings.
Specify the values you want for each of the scan settings and save the values
as the new user default settings.
values as the new user default settings.
Prints a list of user default settings which you selected and saved from the
control panel.
Note: While this list is printing, you cannot start copy, print, or scan jobs from
the printer.
Print a network setup page, which is a list of installed network options. You
can also select and save your active network, either Ethernet or wireless.
Note: This menu is shown only when an internal print server is installed.
to save the values as user default settings and exit. The message New
42