Copied Item Does Not Match The Original Item; Partial Document Or Photo Copies - Lexmark 7500 Series User Manual

Lexmark printer user's guide
Hide thumbs Also See for 7500 Series:
Table of Contents

Advertisement

Adjust the brightness of the copy
1
Load the document facedown on the scanner glass.
2
From the control panel, press
3
Press
.
4
Press
repeatedly to choose Lighter/Darker.
5
Press
or
repeatedly to lighten or darken the copy.
6
Press Start.
Check quality of original document
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.
Are you scanning from photo or glossy paper, a magazine, or a newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper, see "Removing wavy
patterns from scanned photos, magazines, or newspapers" on page 91.
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.

Copied item does not match the original item

Is the original document loaded correctly on the scanner glass?
Make sure the original document is placed in the lower right corner of the scanner glass.
Place the item you want to copy facedown on the scanner glass.
Make sure the lower right corner of the front of the item lines up with the arrows in the lower right corner of the
scanner glass.

Partial document or photo copies

These are possible solutions. Try one or more of the following:
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
or
repeatedly to choose Copy.
186

Advertisement

Table of Contents
loading

Table of Contents