Using The Change Copy Default Settings Submenu; Changing The Default Copy Settings - Lexmark 7500 Series User Manual

Using the Change Copy Default Settings submenu

1
From the Setup menu, press
2
Press .
3
After changing values, press
Use this
Color
Quality
Content Type
2-Sided Original
Paper Handling

Changing the default copy settings

1
From the control panel, press
2
Press .
3
Press repeatedly until Change Default Settings is selected.
4
Press .
From here
Color
Quality
Content Type
2-Sided Original
Paper Handling
5
Use the control panel buttons to navigate the menu items and make your choices.
6
Press to save your settings.
or repeatedly until Change Copy Default Setting is highlighted.
to save these values and exit this submenu.
To
Specify to print in color or black and white.
Specify print quality.
Note: Auto and Photo are good for pictures and paper-based print jobs. Auto
is good for printing on transparencies.
Specify the type of document you want to print.
Specify if you want to copy a two-sided original.
Specify the size and type of paper loaded. For more information, see "Using
the Paper Handling submenu" on page 63.
or repeatedly until Copy is highlighted.
You can
Choose to copy in color and black and white.
Adjust the quality of a copy. You can choose among the following
options: Normal, Photo, Auto, or Draft.
Specify the type of document being copied: Text and Graphics, Photo,
Text Only, or Line Drawing.
Specify whether the original document is two-sided.
Specify the size and type of the paper loaded.
105