Auto Tear-Off (Set To Off); Auto Tear-Off (Set To One Second) - Lexmark 4227 User Manual

Auto Tear-Off (Set to Off)

When Auto Tear-Off is off, press Tear Off/Store to manually move
the continuous form paper to the tear-off position.
1
2
3

Auto Tear-Off (Set to One Second)

When the print buffer has not received data for one second, Auto
Tear-Off automatically moves the continuous form paper to the
tear-off bar. The print line can be anywhere on the page for Auto
Tear-Off to function in this mode.
To change the Auto Tear-Off setting in One-Second mode:
1
2
3
If your application software has delays between data
transmissions while Auto Tear-Off is set to one second, partial
pages may print. To prevent this, set Auto Tear-Off to on.
80
Chapter 4: Selecting and Loading Paper
When your print job has finished, press Tear Off.
The continuous form moves to the tear-off position.
Press Micro or Micro
you want on the tear bar.
Press Start/Stop to set the tear-off position.
The printer beeps twice. The paper rolls backward, then goes
to the new tear-off position.
Press Start/Stop to take the printer offline.
Press Micro or Micro to move the paper to the appropriate
position on the tear bar. The printer beeps if the paper is out of
range.
Press Start/Stop to set and save the tear-off position.
The printer beeps twice. The paper rolls backward, then
advances to the new tear-off position. The Ready light comes
on.
to move the paper to the position