Display Messages - Lexmark 4227 User Manual

Display Messages

Message
Ready (IBM)
Ready (EPSON)
001 Paper Empty/
Add Paper
002 Paper Jam
Remove Paper
005 Cover Open
Close Cover
007 Data Error
00D I/F Error
6XX Machine Chk
FastDraft
Draft
Gothic
126
Chapter 6: Solving Printer Problems
Description
The printer is online and ready to accept data, and IBM PPDS
mode is selected.
The printer is online and ready to accept data, and Epson
emulation mode is selected.
The printer is out of paper or the paper is not loaded
properly. Load paper in the printer. For help, see "Selecting
and Loading Paper" on page 55.
Clear paper jam. Remove any debris from inside the printer.
Top Cover is open or not properly closed. Close the top
cover.
Data transmission error in Serial Interface. Check the serial
settings on the function menu to make sure they are correct.
Check that the serial cable is properly connected at both ends.
Interface mode switch was changed after the printer was
turned on. Return the printer to the appropriate interface
mode (RS-232 or RS-422).
A Hardware error occurred. If this happens, turn off the
printer, fix the paper jam or other problem, then turn the
printer back on. If the error occurs again, contact your point
of purchase, or see the printer registration card for the
number appropriate for your country.
FastDraft font is selected.
Draft font is selected.
Gothic font is selected.