Setting and Using a Macro
You can use up to four macros to store your settings permanently. To set a
macro, follow these steps:
1
2
3
4
5
6
7
To use a macro:
1
2
3
4
5
52
Chapter 3: Using the Operator Panel
Press Menu.
Press Item
until Default Macro appears.
Press Next
and then Item
Press Store to save the setting.
Press Prev.
and then Item
Set and store your settings (see "Macro x Options" on page 40 for a
list of items you can set in your macro).
Press Quit.
Press Menu.
Press Item
until Load Macro appears.
Press Next
until Macro x (x = 1 to 4) appears.
Press Store to save the setting.
Press Quit.
until Macro x (x = 1 to 4) appears.
until Macro x Options appears.