Removing The Tractor 2 Feeder - Lexmark 4227 User Manual

Removing the Tractor 2 Feeder

To remove the Tractor 2 Feeder and load continuous forms on the
normal tractor feeder:
1
Turn the printer Off.
2
If continuous forms are loaded on the Tractor 2 Feeder,
remove the continuous forms.
3
Press down on the tabs on both sides of the Tractor 2 Feeder.
While holding the tabs down, pull the Tractor 2 Feeder
straight out of the printer.
4
Load continuous forms on the normal tractor feeder. For help,
see "To load continuous forms:" on page 70.
5
Replace the Tractor 2 Feeder. For help, see "Installing the Trac-
tor 2 Feeder" on page 97.
6
Reload forms on the Tractor 2 Feeder. For help, see "Loading
Paper in the Tractor 2 Feeder" on page 102.
7
Turn the printer On.
8
Choose the tractor feeder you want to use as the paper source.
For help, see "Parking Continuous Forms and Changing Trac-
tor Feeders" on page 111.
Tab
Tab
Chapter 5: Printer Options
113