Setting The Printer Online Or Offline; Stopping The Printer; Advancing The Paper - Lexmark 4227 User Manual

Setting the Printer Online or Offline

The printer must be online to accept data.
To set the printer:
• Online, press Start/Stop; the Ready light comes on. If paper is not
• Offline, press Start/Stop; the Ready light goes off.

Stopping the Printer

To temporarily stop printing, press Start/Stop until the Ready light is off.
The printer finishes printing the current line and then stops printing.
To resume printing, press Start/Stop until the Ready light is on.

Advancing the Paper

You can use the operator panel to advance the paper when the printer is
not printing.
To advance the paper:
• Press FormFeed to advance the paper to the Top-Of-Form (TOF) on
• Press LineFeed to advance the paper to the next line.
• Press Micro or Micro lightly once for fine alignment, or press and
46
Chapter 3: Using the Operator Panel
loaded, the Check light blinks.
the next page or to eject the cut form.
hold to scroll the paper up or down.