Lexmark 4227 User Manual page 78

10
11
72
Chapter 4: Selecting and Loading Paper
Set the left margin. Adjust the tractors so that the print start
position you want aligns with the symbol [A printed on the
rear plate.
Printing starts at the [A symbol
The distance from the [A symbol to the left edge of the
paper determines the width of the left margin.
Note: If you make a left margin setting in your application
software, it is added to the left margin setting on the
printer.
For example, if you set the left margin at 1 inch (2.54
cm) on the printer, and also have the left margin set at
1 inch (2.54 cm) in your application software, the
printer begins printing 2 inches from the left edge of
the page.
Push down the left tractor locking lever to lock the tractor in
place. Remove slack from the paper and lock the right lever.