Manual AutoGap (AutoGap Set to Off)
When AutoGap is Off, you can manually adjust the gap position between
the printhead and the paper. To manually set AutoGap, press:
1
Menu.
2
Item
3
Next
4
Item
5
Store.
6
Next
7
Item
8
Store to save the setting.
9
Quit to exit the function menu.
The following table gives the manual setting choices and the information
needed to make the appropriate choice for your paper type.
until AutoGap appears.
.
or Item
until Off appears.
.
or Item
to select the manual position you want.
Chapter 3: Using the Operator Panel
49