Loading Paper In The Tractor 2 Feeder - Lexmark 4227 User Manual

Loading Paper in the Tractor 2 Feeder

102
Chapter 5: Printer Options
The Tractor 2 Feeder has a tractor feeder for continuous forms and
a manual feed tray for single sheets and single-part forms.
This section includes directions for loading both continuous forms
in the Tractor 2 Feeder and single sheet or envelopes in the manual
feed tray.
Loading Continuous Forms in the Tractor 2
Feeder
1
Turn the printer On.
2
Make sure the paper path is clear. If a single sheet or envelope
is loaded in the printer, remove it.
3
Make sure AutoGap is set to On or Single AutoGap. For help,
see "Setting AutoGap" on page 48.
4
Make sure the paper select lever is pushed down in the
continuous forms
5
Notice how the manual feed tray fits onto the Tractor 2 Feeder.
You will need to remember this when you replace the tray
later.
position.