System Rear I/O Ports; Serverboard Details - Silicon Graphics Rackable C2110G-RP5 System User's Manual

System Rear I/O Ports

Serverboard Details

007-5841-001
The rear external system I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-1 below for the colors and locations of the various I/O ports.
functions of each of the I/O ports on the backpanel.
3
2
1
4 5
Figure 5-1
I/O Port Locations
Table 5-1 System Backpanel I/O Port Functions
1. USB port 0
2. USB port 1
3. Dedicated IPMI LAN port
4. LAN port 1
5. LAN port 2
6. VGA port
7. UID switch
Note that the dedicated IPMI LAN port runs at 100 Mb/sec.
The 2U C2110G-RP5 system chassis has one node board. The C2110G-RP5 board is configured
with two processors. When configured with two processors, the following rules apply:
• Both processor sockets must have identical revisions, core voltage, and bus/core speed.
• The stepping between the processors on the board must be identical.
• See Figure 5-2 on page 34
not to scale.
6 7
for CPU locations on the serverboard - note that the drawing is
System Rear I/O Ports
Table 5-1 identifies the
31