To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 7- 21. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be
•
authenticated using the local enable password database on the Switch. The
local enable password must be set by the user in the next section entitled
Local Enable Password.
none - Adding this parameter will require no authentication to access the
•
Switch.
radius - Adding this parameter will require the user to be authenticated using
•
the RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated
•
using the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the
•
user to be authenticated using a user-defined server group previously
configured on the Switch.
201