Power On; Power Failure; External Redundant Power System - D-Link xStack DES-6500 User Manual

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual

Power On

Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source
outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators represents
a reset of the system.

Power Failure

As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.

External Redundant Power System

The Switch supports dual, current-sharing, redundant power supplies, located at the bottom front of the chassis.
Figure 2- 5. Redundant Power Supply
11