D-Link xStack DES-6500 User Manual page 17

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Single IP Management support
•
Access Authentication Control utilizing TACACS, XTACACS, TACACS+ and RADIUS protocols
•
Simple Network Time Protocol support
•
System and Port Utilization support
•
System Log Support
•
High performance switching engine performs forwarding and filtering at full wire speed up to 160Gbps.
•
Full- and half-duplex for all gigabit ports. Full duplex allows the switch port to simultaneously transmit and
•
receive data. It only works with connections to full-duplex-capable end stations and switches. Connections to a
hub must take place at half-duplex.
Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
•
Supports by-port Egress/Ingress rate control
•
Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
•
Support port-based enable and disable
•
Address table: Supports up to 16K MAC addresses per device
•
Supports Port-based VLAN Groups
•
Port Trunking with flexible load distribution and fail-over function
•
IGMP Snooping support
•
Layer 3 support including DVMRP, OSPF and RIP
•
SNMP support
•
Secure Sockets Layer (SSL) and Secure Shell (SSH) support
•
System Severity control
•
Safeguard Engine support
•
Access profile filters for the CPU
•
Port Mirroring support
•
MIB support for:
•
RFC1213 MIB II
•
RFC1493 Bridge
•
RFC1757 RMON
•
RFC1643 Ether-like MIB
•
RFC2233 Interface MIB
•
IF MIB
•
Private MIB
•
RFC2674 for 802.1p
•
IEEE 802.1x MIB
•
RS-232 DCE console port for Switch management
•
Provides parallel LED display for port status such as link/act, speed, etc.
•
2