Firmware Upgrade; Configuration File Backup/Restore - D-Link xStack DES-6500 User Manual

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual

Firmware Upgrade

This screen is used to upgrade firmware from the Commander Switch to the Member Switch. To access the following
window, click Single IP Management > Firmware Upgrade. Member Switches will be listed in the table and will be
specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To specify a certain
Switch for firmware download, click its corresponding check box under the Port heading. To update the firmware, enter
the Server IP Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to
initiate the file transfer.
Figure 11- 18. Firmware Upgrade window

Configuration File Backup/Restore

This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP server.
Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC
Address, Model Name and Version. To specify a certain Switch for upgrading configuration files, click its corresponding
radio button under the Port heading. To update the configuration file, enter the Server IP Address where the file resides
and enter the Path/Filename of the configuration file. Click Download to initiate the file transfer from a TFTP server to
the Switch. Click Upload to backup the configuration file to a TFTP server.
Figure 11- 1 . Configuration File Backup/Restore window 9
277