D-Link xStack DES-6500 User Manual page 304

Step 3
After removing the DES-6504/DES-6508/DES-6510/DES-6512 line cards from the switch, enter the new DES-6505/DES-
6507/DES-6509 into the chassis. Check the "show stack_information" command again to see if the new line card(s) are
recognized by the switch.
DES-6500:4#show stack_information
Command: show stack_information
Box
ID Type
--- -----------
1 DES-6505
2 DES-6507
3 USR-NOT-CFG
4 USR-NOT-CFG
5 USR-NOT-CFG
6 DES-6507
7 USR-NOT-CFG
8 USR-NOT-CFG
--------------------------------------------------------------------------------------------------
Topology
Current state :MASTER
Box Count
DES-6500:4#
Step 4
Download the Runtime Version Code (R3.00-B29 for this example) to the new line card in the chassis.
DES-6500:4#download firmware_fromTFTP 10.48.74.121 c:/6500rS_3.00-B29.had unit 6
Command: download firmware_fromTFTP 10.48.74.121 c:/6500rS_3.00-B29.had unit 6
Connecting to server................... Done.
Download firmware.................... Done.
Connecting to slave..................Done.
Upload firmware .......................Done.
Line card will automatically reboot after a few minutes. Please don't power off!
Success.
DES-6500:4#
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Exist
-----
exist
exist
no
no
no
exist
no
no
:STAR
:3
Prio- Prom Runtime
rity version version
----- -------- --------
16 2.00-B20 3.00-B29
16 2.00-B20 3.00-B29
16 0.00-B16 1.01-B37
289
H/W
version
--------
0A1
3A1
2A1