D-Link xStack DES-6500 User Manual page 162

Modular layer 3 chassis ethernet switch
Hide thumbs Also See for xStack DES-6500:
Table of Contents

Advertisement

Hello Packet
Hello packets are OSPF packet type 1. They are sent periodically on all interfaces, including virtual links, in order to
establish and maintain neighbor relationships. In addition, Hello Packets are multicast on those physical networks having a
multicast or broadcast capability, enabling dynamic discovery of neighboring routers.
All routers connected to a common network must agree on certain parameters such as the Network Mask, the Hello
Interval, and the Router Dead Interval. These parameters are included in the hello packets, so that differences can inhibit
the forming of neighbor relationships. A detailed explanation of the receive process for Hello packets is necessary so that
differences can inhibit the forming of neighbor relationships.
The format of the Hello packet is shown below:
Field
Network Mask
Options
Hello Interval
Router Priority
Router Dead Interval
Designated Router
Backup Designated
Router
Field
Neighbor
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Hello Packet
Version No.
Checksum
Hello Interval
Figure 6- 122. Hello Packet
Description
The network mask associated with this interface.
The optional capabilities supported by the router.
The number of seconds between this router's Hello packets.
This router's Router Priority. The Router Priority is used in the
election of the DR and BDR. If this field is set to 0, the router is
ineligible become the DR or the BDR.
The number of seconds that must pass before declaring a silent
router as down.
The identity of the DR for this network, in the view of the
advertising router. The DR is identified here by its IP interface
address on the network.
The identity of the Backup Designated Router (BDR) for this
network. The BDR is identified here by its IP interface address on
the network. This field is set to 0.0.0.0 if there is no BDR.
Description
The Router IDs of each router from whom valid Hello packets have
been seen within the Router Dead Interval on the network.
1
Packet Length
Router ID
Area ID
Authentication Type
Authentication
Authentication
Network Mask
Options
Router Dead Interval
Designated Router
Backup Designated Router
Neighbor
147
Router Priority

Advertisement

Table of Contents
loading

Table of Contents