Initializing Ports For Port Based 802.1X - D-Link xStack DES-3526DC User Manual

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Initializing Ports for Port Based 802.1x

Existing 802.1x port and MAC settings are displayed and can be configured using the window below.
Click Port Access Entity > PAE System Control > Initialize Port(s) to open the following window:
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window displays
the current status of the port(s).
This window displays the following information:
Parameter
From and To
Port
MAC Address
Auth PAE State
Backend State
Port Status
Figure 6- 92. Initialize Port window
Description
Select ports to be initialized.
A read-only field indicating a port on the Switch.
The MAC address of the Switch connected to the corresponding port, if any.
The Authenticator PAE State will display one of the following: Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and
N/A.
The Backend Authentication State will display one of the following: Request, Response,
Success, Fail, Timeout, Idle, Initialize, and N/A.
The status of the controlled port can be Authorized, Unauthorized, or N/A.
110