Time Zone And Dst - D-Link xStack DES-6500 User Manual

Time Zone and DST

The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following screen.
The following parameters can be set:
Parameter
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
from GMT in +/-
HH:MM
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 53. Time Zone and DST Settings page
Description
Use this pull-down menu to Enable or Disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset - 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich
Mean Time (GMT.)
Time Zone and DST
85