Troubleshooting - Outback THG2302P-3 Operating Instructions Manual

Troubleshooting

Problem
Burner will not light using the
ignition system
Burner will not light with a match LP gas bottle is empty
Low flame or flashback (fire in
burner tube— a hissing or
roaring noise may be heard)
Gas valve knob difficult to turn
Possible Cause
LP gas bottle is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas hose
Electrode wire is loose or disconnected
on electrode
Electrode or wire is damaged
integral ignitor
Faulty
Incorrect electrode gap/ Bent collector
box
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas hose
LP gas bottle too small
Obstructions in burner
Obstructions in gas jets or gas hose
Windy conditions
Integral ignition system jammed
Gas valve jammed
17
Solution
Replace with full bottle
Have regulator checked or replaced
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Change ignitor
The gas collector box around the
electrode needs to be in line with
the burner with a gap of 3 to 4mm
between the end of the electrode and
the tag on the end of the collector box.
Realign the collector box as required.
Replace with full bottle
Have regulator checked or replaced
Clean burner
Clean jets and gas hose
Use larger bottle
Clean burner
Clean jets and gas hose
Use barbecue in a more sheltered
position
Replace gas valve
Replace gas valve