1. Manuals
  2. Brands
  3. Outback Manuals
  4. Grill
  5. Spectrum 2 Burner
  6. Assembly and operating instructions manual

Outback Spectrum 2 Burner Assembly And Operating Instructions Manual

Hooded gas barbecues
Hide thumbs Also See for Spectrum 2 Burner:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Assembly and Operating Instructions Manual
Assembly and Operating Instructions for Outback®
Spectrum 2 Burner, Spectrum 3 Burner Hooded Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
•
•
•
•
•
•
WARNING
•
•
FOR YOUR SAFETY
If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and
contact your local dealer.
Gas Barbecues
For outdoor use only.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced.
1.
2.
FOR YOUR SAFETY
Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359

Advertisement

Table of Contents
loading

Related Manuals for Outback Spectrum 2 Burner

Summary of Contents for Outback Spectrum 2 Burner

  • Page 1 Gas Barbecues Assembly and Operating Instructions for Outback® Spectrum 2 Burner, Spectrum 3 Burner Hooded Gas Barbecues Photographs are not to scale. Specifications subject to change 0359 without prior notice. • For outdoor use only. • Read instructions before using the appliance. Failure to follow instructions could result in death, serious bodily injury, and/or property loss.

  • Page 2: Parts List

    A. Parts List Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram’. Outback® Spectrum Outback® Spectrum CODE PART 2 Burner Hooded 3 Burner Hooded Hood Handle...

  • Page 3: Parts Diagrams

    B. Parts Diagrams Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see hardware pack page.
  • Page 4 C. Hardware Reference Diagram Specifications subject to change without prior notice. D2, D3...
  • Page 5 D. Assembly TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/crosspoint screwdriver, adjustable spanner or metric spanner set. The assembly of this barbecue requires 2 people. Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are present.
  • Page 6 Attach the side shelves (C1) to the front/rear left legs (C2,C3) and front/rear right legs (C4,C5) using the trolley bolts (D1). Remove all cast iron cooking components, briquettes, drip tray, and any internal packaging from the barbecue body. Note: Loosen off the bolts and move the brackets down to their lowest position. Retighten the bolts.
  • Page 7 Lay the assembled trolley on its side. Lay the body (B1) on its back and slide into position between the trolley legs. Warning: Care must be taken to ensure hood does not fall open unexpectedly. When positioning the body of the barbecue, ensure the control panel is on the same side as the legs with Velcro fastenings.
  • Page 8 Attach the drip tray handle (B11) to the drip tray using the handle bolts (D6). Put the drip tray underneath the body (B1) from back side or front side. Remove the plastic wrap from the briquettes(B5,B6) and lay them carefully into the body ensuring they lie level within the body.
  • Page 9 (Rear view of the barbecue trolley.) Attach the warming rack (B13) to the Attach the screen (C6) to the front left/right hood as shown. legs as shown. Connect the gas hose (B12) to the BBQ. Ensure the mating faces of the connection are clean and not damaged.

  • Page 10: Installation

    Butane Minimum Propane Minimum Open the barbecue hood before lighting. Bottle Size Bottle Size Do not move the barbecue while alight. Outback® 15kg This barbecue must not be left unattended Spectrum when lit. 2 Hooded The hood handle can become very hot. Grip Outback®...

  • Page 11: Operation

    G2. Precautions understand the IMPORTANT INFORMATION Do not obstruct any ventilation openings in the section of this manual. barbecue body. Position the gas supply bottle on This barbecue is not designed to be used with level ground next to the barbecue and safely away more than 50% of the cooking area as a solid from any source of heat.
  • Page 12 • surfaces and the warming rack from the After lighting, turn the burners to the high barbecue. position for 3-5 minutes in order to pre heat Slide one of the spit forks onto the spit rod the barbecue. This should be done before and tighten its thumb screw to secure it into each cooking session.

  • Page 13: Care And Maintenance

    Clean the portholes with a pipe cleaner or piece of barbecue covers and other accessories are wire. Take care not to enlarge the portholes. available from your local Outback® stockist. Clean the insect screen on the end of the venturi tube with a bristle brush (i.e. an old toothbrush).

  • Page 14: Technical Specifications

    If you need to clean fully, Burners Approval Input Size Pressure use hot soapy water and a cloth, or nylon-bristled brush only. Remove cooking surfaces and burners Outback® Spectrum 0359 before full cleaning. Do not immerse the gas 7.87kW Butane/28 2 Burner 359AS128 controls or manifold in water.

  • Page 15: Troubleshooting

    K. Troubleshooting Problem Possible Cause Solution Burners will not light using LP gas bottle is empty Replace with full bottle the ignition system Faulty regulator Have regulator checked or replace Obstructions in burners Clean burners Obstructions in gas jets or gas hose Clean jets and gas hose Electrode wire is loose or disconnected Reconnect wire...
  • Page 16 OUTBACK UK LTD LIMITED 10 YEAR WARRANTY OUTBACK barbecues are warranted to the original purchaser against defects in materials and workmanship. Porcelain coated barbecue bodies, porcelain coated roasting hoods and stainless steel roasting hoods are warranted for a period of ten (10) years from the date of purchase.

This manual is also suitable for:

Spectrum 3 burner

Table of Contents