Installing The Mounting Rails - Viessmann VITOSOL 200-T SD2A 2m2 Series Installation Instructions Manual

Installing the Mounting Rails

1.
Roof brackets
16.9" /
430mm
90º
5.
Note:
See page 9 for numbered parts
description.
9.1" /
230mm
61.4" /
1560mm
3.
4.
2x
2.
90º
Installation on Sloped Roofs
(Horizontal Tube Orientation)
When several collectors are mounted
adjacently, the distance between the
installation rails is 1 " / 26mm (see
page 11).
1. Secure the mounting rail
roof brackets using T-bolts
nuts . Ensure rail is aligned
vertically and horizontally.
IMPORTANT
Ensure the mounting rail is installed
with the single slot in the rail facing
upwards.
2. Align and secure the retaining plates
onto the mounting rail
3. Secure mounting brackets
the mounting rails .
4. Align the mounting rails with tube
holders and secure to the
mounting brackets .
5. Secure a mounting bracket
the mounting rail on the other
side of the mounting rail with tube
holders .
to the
and
.
onto
onto
13