Viessmann VITOSOL 200-T SD2A 2m2 Series Installation Instructions Manual page 34

Installation on Flat Roofs
or Freestanding Installation
Assembling the Support Frame
ription.
34
(continued)
1. Secure the adjustable upper support
to the collector support
shown.
2. Secure the adjustable upper support
and lower support
desired angle of inclination.
3. Assemble the clamping brackets
(two as shown and one at the top) to
the collector support
(leave fasteners loose).
4. Assemble the retaining plate
the collector support
(leave fasteners loose).
5. Secure the cross braces
diagonally to the inside of the
adjustable lower support
shown.
6. Secure the cross braces
diagonally to the outside of the
adjustable upper support
shown.
7. Drill a 8.5 mm Ø hole in each cross
brace (where they overlap) and
secure together as shown.
as
to the
as shown
to
as shown
as
as