Viessmann VITODENS 100-W Operating Instructions Manual
Heating system with control unit for constant temperature or weather-compensated mode
Hide thumbs
Also See for VITODENS 100-W:
- Installation instructions manual (204 pages) ,
- Installation and service instructions manual (105 pages) ,
- Manual (84 pages)
Related Manuals for Viessmann VITODENS 100-W
Summary of Contents for Viessmann VITODENS 100-W
-
Page 1: Operating Instructions
VIESMANN Operating instructions for the system user Heating system with control unit for constant temperature or weather-compensated mode VITODENS 100-W Please keep safe. 5592 606 GB 2/2009... -
Page 2: Safety Instructions
Safety instructions For your safety Please follow these safety instructions closely to prevent accidents and mate- rial losses. Safety instructions explained Danger Incorrectly executed work on the Danger heating system can lead to life- This symbol warns against the threatening accidents. risk of injury. - Page 3 Safety instructions For your safety (cont.) If you smell flue gas Ancillary components, spare and wearing parts Danger Flue gas can lead to life-threat- Please note ening poisoning. Components that are not tested ■ Shut down the heating system. with the heating system may lead ■...
-
Page 4: Table Of Contents
Index Index Introductory information Commissioning..................... Your system is preset at the factory..............Where to find the controls Summary of controls and indicators..............■ Control and display elements................■ Indicators on display..................Operating mode of the heating system..............■ Operation without room temperature control unit..........■... -
Page 5: Introductory Information
Introductory information Commissioning Commissioning and matching the con- trol unit to local conditions and the struc- tural characteristics of the building must be carried out by your heating contrac- tor. Gas council no. Rated output range Gas council no. 7.9 - 13 41-819-21 7.9 - 16 41-819-22... -
Page 6: Where To Find The Controls
Where to find the controls Summary of controls and indicators Control and display elements °C A Display C tr "Heating water temperature" B à "Service settings" rotary selector rotary selector D ON/OFF switch (only for contractors) Indicators on display °C 8:8:8 8:8:8 °F... -
Page 7: Operating Mode Of The Heating System
Where to find the controls Operating mode of the heating system Operation without room temperature control unit The required room temperature can be set with rotary selector "tr" (see page 10). Operation with room temperature control unit Please make any adjustments to the Note connected room temperature control unit The heating water temperature at rotary... -
Page 8: Start-Up/Shutdown
Start-up/shutdown Starting the heating system We recommend you contact your local heating contractor if you are planning to start up a heating system that has not been used for a long period. 1. Check that the heating system is full. 2. -
Page 9: Shutting Down The Heating System
Start-up/shutdown Shutting down the heating system (cont.) Shutting down the heating system Shut down your heating system completely if it will not be needed for longer periods (several months). We recommend you contact your local heating contractor if you plan to take your heating system out of use for longer periods. -
Page 10: Settings
Settings Heating Switching ON: Move rotary selector "tr" to the required heating water temperature. The temperature range can be adjusted between 30-80 °C. Note If a room temperature control unit is con- nected, set the required room tempera- ture at this control unit (see page 7). If central heating is active, indicator "r"... -
Page 11: Displays
Displays Heating water temperature The boiler water temperature is shown on the display at all times during opera- °C tion. -
Page 12: What To Do If
What to do if... System characteristics What to do if... Cause Remedy ... the heating system will not No mains voltage Switch ON/OFF switch ON operate Rotary selector Set required heating water "tr" is on "0" temperature (see page 10) Fuse in power dis- Notify your local heating con- tribution panel... -
Page 13: Fault Indicator On Display
What to do if... System characteristics (cont.) Reset burner fault (press reset) Turn rotary selector "rt" to "U RESET" in under 2 s, then back to the control range. Fault indicator on display Any fault in the heating system will be shown on the display. You can check the fault code on the display and then notify your heating contractor accordingly. -
Page 14: Maintenance Cleaning
Maintenance Cleaning All appliances may be cleaned with a commercially available domestic clean- ing agent (non-scouring). Inspection and maintenance The inspection and maintenance of a heating system is prescribed by the Building Regulation Part L and the appropriate best practice guide and standards. Regular maintenance ensures trouble-free, energy saving and environmentally responsible heating. -
Page 15: Energy Saving Tips
Energy saving tips Energy saving tips With the following steps, you can save additional energy: ■ Correct ventilation/airing. Briefly open windows A fully and at the same time close thermostatic valves B ■ Never overheat rooms; endeavour to achieve a room temper- ature of 20 °C;... -
Page 16: Keyword Index
Contact your local contractor if you have any questions regarding the maintenance and repair of your system. You may, for example, find local contractors on the internet under www.viessmann.com. Viessmann Werke GmbH&Co KG Viessmann Limited D-35107 Allendorf Hortonwood 30, Telford...