Optional.field.equipment; Required.tools.and.adhesives; Using.the.manual; Before.starting.assembly - Hangar 9 Pulse XT 40 Plug-N-Play Assembly Manual

Optional Field Equipment
•.Fieldmate™.Pre-built.Flight.Box.(HAN117).
•.Blue.Block.After.Run.Oil.(EVOX1000).
•.12V.7Ah.Sealed.Battery.(HAN102).
Required Tools and Adhesives
Tools
•.Adustable.wrench.
•.Phillips.screwdriver.(large).
•.Ruler
Adhesives
•.Pacer.Z-42.Threadlock
Using the Manual
This.manual.is.divided.into.sections.to.help.make.assembly.easier.to.understand,.and.to.provide.breaks.between.each.
major.section..In.addition,.check.boxes.have.been.placed.next.to.each.step.to.keep.track.of.each.step.completed..Steps.

with.a.single.box.( ).are.performed.once,.while.steps.with.two.boxes.(
repeating,.such.as.for.a.right.or.left.wing.panel,.two.servos,.etc..Remember.to.take.your.time.and.follow.the.directions.
Before Starting Assembly
Before.beginning.the.assembly.of.the.Pulse
fuselage,.wing.panels,.rudder,.and.stabilizer.for.damage..If.you.find.any.damaged.or.missing.parts,.contact.the.place.
of.purchase.If.you.find.any.wrinkles.in.the.covering,.use.a.heat.gun.or.sealing.iron.to.remove.them..Use.caution.while.
working.around.areas.where.the.colors.overlap.to.prevent.separating.the.colors.
HAN101 – Sealing Iron
HAN141 – Sealing Iron
4
•.Cleaner.&.towels
•.Power.Panel.(HAN106)
•.PowerPro™.12V.Starter.(HAN161)
•.Hobby.knife
•.Phillips.screwdriver.(small)
™
.XT,.remove.each.part.from.its.bag.for.inspection..Closely.inspect.the.
Sock
 
. ).indicate.that.the.step.will.require.
HAN100 – Heat Gun
HAN150 – Covering Glove