Section.2:.Receiver.and.battery.installation - Hangar 9 Pulse XT 40 Plug-N-Play Assembly Manual

Section 2: Receiver and Battery Installation
Required Parts
•.Fuselage
•.Receiver.battery.

.Step 1
Wrap.the.receiver.and.receiver.battery.in.1/4".(6mm)..
foam.to.protect.them.from.engine.vibrations.

.Step 2
Plug.the.servos,.extensions.and.switch.harness.into.the.
receiver..Plug.the.receiver.battery.and.switch.harness.
together..Place.the.receiver.and.receiver.battery.into.the.
fuselage.
•.Receiver

.Step 3
Route.the.receiver.antenna.to.the.rear.of.the.fuselage.
using.the.pre-installed.antenna.tube.
Note:.Do.not.cut.the.excess.antenna.wire.as.
it.will.reduce.the.range.of.your.radio.system.
9