Section.4:.Spinner.installation - Hangar 9 Pulse XT 40 Plug-N-Play Assembly Manual

Section 4: Spinner Installation
Required Parts
•.Fuselage
Required Tools and Adhesives
•.Phillips.screwdriver.
•.Adjustable.wrench

.Step 1
Remove.the.plastic.packaging.cap.from.the.crankshaft.of.
the.engine.

.Step 2
Remove.the.propeller.nut.and.washer.from.the.crankshaft..
Slide.the.spinner.backplate.onto.the.crankshaft.
12
•.Propeller

.Step 3
Slide.the.propeller.onto.the.engine.crankshaft..Install.
the.washer.and.nut.onto.the.engine.crankshaft..Align.the.
propeller.so.it.is.slightly.away.from.the.dimples.of.the.
spinner.backplate.

.Step 4
Test.fit.the.spinner.cone.onto.the.backplate..Make.sure.
the.gap.in.the.spinner.cone.is.evenly.positioned.around.
the.propeller..Reposition.the.propeller.in.relation.to.to.the.
spinner.backplate.if.necessary.