Optional Field Equipment; Tools, Supplies, And Adhesives Required; Kit Contents - Hangar 9 ULTRA aspire Instruction Manual

Optional Field Equipment

Weight for balancing your Aspire:
You will need to balance your Aspire after you've completed assembly and have installed the receiver, battery and servos. Use of the
stick-on type of weights is recommended and can be obtained at your dealer. Before adding weight to the sailplane, try moving the
receiver battery pack to adjust the center of gravity (usually as far forward as possible).
Foam Rubber:
Also, it's a good idea to use foam rubber (1/4" thick) to wrap your receiver and battery pack to give support and protection in hard
landings.
Tools, Supplies, and Adhesives Required (Not Included in Kit)
Tools & Supplies
• Medium grit sandpaper • Ruler
• Mixing sticks for epoxy • Felt tipped Pen
• Epoxy brush • Pencil
• Rubbing alcohol • Pliers
• Paper towels • Drill
• Hobby knife • Drill bit:
• Wax paper • #64 rubber bands
• Small round file • 90° triangle
Adhesives
• 30-minute epoxy
• 6-minute epoxy
• Thin CA-glue
• Thick CA-glue
• CA debonder
1 / " • 1 /
16
" masking tape
2
5