Panasonic KX-NCP500 Operating Manual page 92

1.3.33 Headset Operation
•
For KX-NT560/KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346
telephone users:
•
With KX-NT560/KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346
telephones, you can use a Bluetooth wireless headset registered on your extension as
a headset.
•
Operating Distance
Please keep the telephones with connected Bluetooth Modules, 3 m (9 ft 10 in) or more
apart from each other. Also, if a Bluetooth headset is in use near a telephone with a
connected Bluetooth Module, other than the one it is registered to, noise may be heard.
Move away from the telephone and closer to the one it is registered to, to improve the
signal.
•
Noise
Signals are transmitted between this module and the Bluetooth headset using radio
waves. For maximum distance and noise free operation, it is recommended that the
module is situated away from electrical appliances such as faxes, radios, PCs, or
microwaves.
–
•
For KX-NT500 series telephones users:
•
Customizing Your Phone
•
3.1.2 Personal Programming—
Select the equipment to use.
•
3.1.4 Customizing the Buttons
Create or edit a Headset button.
Answer/Release Button
Customized Answer and Release buttons can make using a headset much easier. You can
answer incoming calls or disconnect the line with these buttons.
Some DSS Consoles have fixed ANSWER and RELEASE buttons.
To answer
PT
(Answer)
Press Answer.
92 Operating Manual
Systems using the 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere
with this product. Examples of such systems are cordless telephones, wireless LAN,
Home RF, microwave ovens and other ISM devices. These systems may cause minor
noise.
With KX-NT500 series telephones, you can use a Electric Hook Switch (EHS)
Headsets. For the latest information about headsets that have been tested with this
unit, consult your dealer.
Talk.
Headset Operation
Document Version 2013-05