Panasonic KX-NCP500 Operating Manual page 155
Pure ip-pbx
Hide thumbs
Also See for KX-NCP500:
- Programming manual (1016 pages) ,
- Pc programming manual (892 pages) ,
- Features manual (504 pages)
Table of Contents
Advertisement
To call
KX-NT300/KX-NT500/KX-DT300/KX-T7600/
KX-TCA185/KX-TCA285/KX-TCA385
While on-hook
Press Left.
Press Up or Down
until desired number
appears.
•
The following PSs can display incoming call log information from other extensions (including
TIE) with same information as a PT connected to the PBX.
–
KX-TCA185/KX-TCA285/KX-TCA385
•
PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
•
For details about referencing the incoming call log using the PS's navigator key, refer to the
PS's documentation.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
* System programming is required for this operation.
•
This operation is available only for digital proprietary telephones with a display.
To store the caller's information in personal speed dialing
Display PT
When the desired party is displayed
AUTO DIAL
STORE
Press STORE.
Document Version 2013-05
Off-hook.
REDIAL
Press REDIAL
until desired number
appears.
Off-hook.
1.4.2 Call Log, Outgoing
Operating Manual
155
Advertisement
Table of Contents
