Panasonic KX-NCP500 Operating Manual page 22

1.1.1 Before Operating the Telephones
Button
Call Log
Call Log for ICD Group
Log-in/Log-out
Log-in/Log-out of a specified
group
Log-in/Log-out for all groups
Hurry-up
Wrap-up
System Alarm
Time Service (Day/Night/
Lunch/Break)
Answer
Release
Toll Restriction (TRS)
Calling Line Identification
Restriction (CLIR)
Connected Line Identification
Restriction (COLR)
Headset
Time Service Switching Mode
(Automatic/Manual)
Two-way Record
Two-way Transfer
One-touch Two-way Transfer
Live Call Screening (LCS)
Voice Mail Transfer
Network Direct Station
Selection (NDSS)
CTI
Check-in
Check-out
22 Operating Manual
Used to show the incoming call information.
Used to have a Call Log button for incoming call distribution group.
Used to switch between the log-in and log-out mode.
Used to have a Log-in/Log-out button for another incoming call distribution
group.
Used to have a Log-in/Log-out button for all groups.
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Used to switch the wrap-up status, Ready and Not Ready mode.
Used to confirm a PBX error.
Used to switch the time service mode.
Used to answer an incoming call.
Used to disconnect the line during or after a conversation or to complete
a Call Transfer.
Used to change the toll restriction level of other extension users
temporarily.
Used to switch between the CLIP and CLIR services.
Used to switch between the COLP and COLR services.
Used to talk using the headset.
Used to switch the time service mode, Automatic or Manual.
Used to record a conversation into your own mailbox.
Used to record a conversation into the mailbox of a specific extension.
Used to record a conversation into the mailbox of a specific extension with
one touch.
Used to monitor your own voice mailbox while an incoming caller is leaving
a message and, if desired, intercept the call.
Used to transfer a call to the mailbox of a specified extension. Also used
to access some voice mail features with one touch.
Used to access an extension connected to other PBXs in the network with
one touch.
Used to access CTI features.
Used to switch the room status of extensions from Check-out to Check-in.
Used to switch the room status of extensions from Check-in to Check-out.
Feature
Document Version 2013-05