Data Line Security - Panasonic KX-NCP500 Operating Manual

For an extension joining the conversation
To join a conversation with an entry code
PT/SLT/PS/SIP Extn.
Off-hook.
Enter #.
•
* If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
•
Entry codes can consist of the digits "0" through "9". When " " is used for an entry code, no
one can join a conversation that is already in progress.
•
When you are using an outside telephone (through DISA or TIE Line), it is possible to join
the conversation after accessing your extension using Walking COS.
•
Extensions/outside telephones can join the conversation using this feature only when the
conference group call has already been established between the extension originating a
conversation and at least one member.
•
To join a conversation that is already in progress, extensions/outside telephones must be
using an idle extension with no held calls.
•
If a conversation has reached the maximum number of participants, this feature cannot be
used to join the conversation.
• Starting a Conference Group Call using Hands-free Answerback
If the Hands-free Answerback feature is enabled with at least one conference group member,
the call can be automatically answered and the conversation begins with only one participant
(the caller). Then, up to 6 participants can use the Join After Time Out feature to join the
conversation.

1.3.18 Data Line Security

You can protect the line against audible notification tones, such as a call waiting tone during a conversation.
Set this feature if your extension has a data communication device, such as a PC or fax machine connected
to ensure secure data transmission.
Document Version 2013-05
3 2
Enter 32.
Enter #.
C.Tone
Talk.
conference
group no.
Dial conference
Enter entry code
group number (1 digit).
(max. 8 digits).
1.3.18 Data Line Security
*
entry code
Operating Manual 67