Quick Dialing; Redial, Last Number; Room Status Control - Panasonic KX-NCP500 Operating Manual

1.3.60 Room Status Control

1.3.58 Quick Dialing

You can make a call simply by pressing the preprogrammed number for quick dialing.
PT/SLT/PS/SIP Extn.
Off-hook.
•
This is a useful feature for hotels.
For example, to dial Room Service, dial the digit "3", not the full extension number.

1.3.59 Redial, Last Number

This is convenient when calling the same outside party again.
PT/SLT/PS/SIP Extn.
Off-hook. Press REDIAL or enter #.
•
If you want to log outgoing intercom calls to the outgoing call log, consult your System Installer
or Administrator.
•
If you have seized a CO line, pressing the REDIAL button will be ignored if the last number
you dialed was an extension.
•
Up to 32 digits can be stored and redialed.
•
After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
1.3.60 Room Status Control
In a hotel-type environment, an extension assigned as a hotel operator can check guests into
or out of rooms and confirm that the room is clean and ready for the next guest by changing
the room status of the corresponding extension. The hotel operator's extension must have
flexible buttons assigned as Check-in, Check-out, and Cleaned-up buttons, and a DSS button
for each extension that will be used in a guest room.
120 Operating Manual
quick dialing no.
Dial quick dialing
number (max. 8 digits).
REDIAL
OR
Document Version 2013-05