Panasonic KX-NCP500 Operating Manual page 12

F.C.C. REQUIREMENTS AND RELEVANT INFORMATION
F.C.C. REQUIREMENTS AND RELEVANT
INFORMATION
1.
Notification to the Telephone Company
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
the side of this equipment is a label that contains, among other information, a product identifier in the
following format:
[For KX-NCP Series PBX Users Only]
US: ACJMF04BKX-NCP500
[For KX-TDE Series PBX Users Only]
US:AAAEQ##TXXXX
If requested, this number must be provided to the telephone company.
Installation must be performed by a qualified professional installer. If required, provide the telephone
company with the following technical information:
•
Telephone numbers to which the system will be connected
•
Make: Panasonic
•
Model:
KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200/KX-TDE600
•
Certification No.: found on the side of the unit
•
Ringer Equivalence No.
KX-NCP500/KX-NCP1000: 0.4B
KX-TDE100/KX-TDE200: 0.3A
KX-TDE600: 0.4B
•
Facility Interface Code
KX-NCP500/KX-NCP1000: 02LS2, 04DU9.BN/DN/1KN/1SN
KX-TDE100/KX-TDE200: 02LS2, 04DU9.BN/DN/1KN/1SN
KX-TDE600: 02LS2, 04DU9.BN/DN/1KN/1SN
•
Service Order Code
KX-NCP500/KX-NCP1000: 9.0F, 6.0P
KX-TDE100/KX-TDE200: 9.0F, 6.0P
KX-TDE600: 9.0F, 6.0P
•
Required Network Interface Jack
KX-NCP500/KX-NCP1000: RJ45S, RJ48C
KX-TDE100/KX-TDE200: RJ21X, RJ48C, RJ2HX
KX-TDE600: RJ21X, RJ48C
2.
Ringer Equivalence Number (REN)
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the total RENs, contact the local telephone company.
[For KX-NCP Series PBX Users Only]
The REN for this product is part of the product identifier that has the format US: ACJMF04BKX-NCP500.
The digits represented by 04 are the REN without a decimal point (e.g., 04 is a REN of 0.4). For earlier
products, the REN is separately shown on the label.
[For KX-TDE Series PBX Users Only]
For products approved after July 23, 2001, the REN for this product is part of the product identifier that has
the following format:
12 Operating Manual Document Version 2013-05