Icd Group Features-Log-In/Log-Out Monitor And Remote Control - Panasonic KX-NCP500 Operating Manual

1.3.40 ICD Group Features—Log-in/Log-out Monitor and Remote Control
•
* The status will be as follows:
Ready ® Not Ready
Not Ready ® Ready
Wrap-up ® Not Ready
•
The Log-in/Log-out of a specified group button light shows the current status as follows:
Off: Log-in mode
Red on: Log-out mode
•
The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:
Off: Ready mode
Red on: Not Ready mode
Flashing red: Wrap-up mode
•
In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group,
even if it belongs to multiple groups.
•
The last remaining logged-in extension may not be allowed to log out, depending on system
programming.
•
The Supervisor extension can control the Log-in/Log-out status of other extensions.
For more information, refer to "1.3.40 ICD Group Features—Log-in/Log-out Monitor and
Remote Control".
•
For information about other ICD group features, refer to "1.3.36 ICD GROUP FEATURES".
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a
Wrap-up button.
1.3.40 ICD Group Features—Log-in/Log-out Monitor and Remote
Control
An extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Log-out
status of incoming call distribution (ICD) group members with the lights of corresponding DSS
buttons. The supervisor extension can change the Log-in/Log-out status of an extension by
pressing the corresponding DSS button.
To perform this operation, the supervisor has to enter incoming call queue monitoring mode
first.
100 Operating Manual Document Version 2013-05