Flame Characteristics; Pilot Flame - Vermont Castings Intrepid INDVRCB Homeowner's Installation And Operating Manual

Vermont castings intrepid series direct vent, rear vent gas heater
Hide thumbs Also See for Intrepid INDVRCB:
Table of Contents

Advertisement

Turn
counterclockwise
to increase
flame height
Fig. 64 Flame adjustment knob for SIT valve.
FP390
FLAME ADJUSTMENT KNOB
11/21/96
PSE Pilot
LG500
Fig. 65 Correct pilot and burner flame patterns.
Extension Knobs
On/Off and Hi/Lo control knob extensions have been in-
cluded in the finish bag. These may be installed on the
appropriate knob by aligning the notch on the existing
knob (Fig. 62) with the tab on the inside of the extension
knob (Fig. 66) Push the extension knob as far as it will go
onto the existing knob.
20012761
Turn clockwise
to decrease
flame height
ST233
ST233
pilot
12/9/99 djt
Intrepid® Direct Vent - Rear Vent Gas Heater

Flame Characteristics

It is important to periodically perform a visual check of the
pilot and the burner flames. Compare them to Figure 65.
If any of the flames appear abnormal call a service per-
son.
SIT Pilot
CO105d

Pilot flame

6/07 djt
Tab - align with notch
on existing knob
Fig. 66 Extension knob.
CO105d
St972
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents