Table of Contents
Advertisement
Turn
counterclockwise
to increase
flame height
Figure 64 - Flame adjustment knob for SIT valve.
FP390
FLAME ADJUSTMENT KNOB
11/21/96
PSE Pilot
Figure 65 - Correct pilot and burner flame patterns.
Extension Knobs
On/Off and Hi/Lo control knob extensions have been
included in the finish bag. These may be installed on the
appropriate knob by aligning the notch on the existing knob
(Figure 62) with the tab on the inside of the extension knob
(Figure 66) Push the extension knob as far as it will go onto
the existing knob.
31
Turn clockwise
to decrease
flame height
ST233
pilot
12/9/99 djt
Flame Characteristics
It is important to periodically perform a visual check of the
pilot and the burner flames. Compare them to Figure 65.
If any of the flames appear abnormal call a service person.
SIT Pilot
CO105d
Pilot flame
6/07 djt
LG500
Intrepid log flames
7/07
Figure 66 - Extension knob.
Tab - align with notch
on existing knob
ST972
extension knobs
7/07
20012761
Advertisement
Table of Contents
