Optional Accessories - Vermont Castings Intrepid INDVRCB Homeowner's Installation And Operating Manual

Fan Kits
FK20 Fan
The fan helps distribute heated air from within the firebox
out into the room. The fan is controlled by a snapstat that
turns power on and off as the firebox temperature rises
above and falls below a preset temperature. A rheostat
provides for variable fan speeds.
Specifications
115 Volt / 60Hz / .75 Amps
Maintenance
The fan itself does not require regular maintenance, how-
ever, periodic cleaning of the fan and the surrounding area
is required.
Installation
Refer to Page 13 for installation instructions.
Remote Controls
The remote control allows you to turn the heater on or off
from anywhere in the room. Refer to Page 38 for wiring
diagrams. These remote controls are for use on RN/RP
model stoves.
Model Functions Controlled
RC1 ON/OFF
RC2 ON/OFF and Temperature
IMTFK Wall mounted thermostat control
20012761

Optional Accessories

Warming shelves add versatility to your stove; they can be
used to keep foods warm at mealtime.
The shelf installation is completed in three stages. First
attach the shelf loosely to the stove, leaving the screws
loose enough to allow final adjustments. Then, position
the shelf and adjust the brackets so the shelf fits correctly.
Finally, tighten the screws.
Refer to the instructions included with each warming shelf
for complete installation procedures.
Intrepid® Direct Vent - Rear Vent Gas Heater
Warming Shelf
Model Color
0000098 Classic Black
1372 Midnight Blue
1373 Brown Majolica
1376 Biscuit
1377 Chestnut Brown
1378 Ebony
1379 Vt. Classic Green
1380 Bordeaux
43