Cleaning The Air Filter And Air Filter Box; Installing The Air Filter - Husqvarna 125 TC EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.27

Cleaning the air filter and air filter box

Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
11.28

Installing the air filter

Main work
–
Push air filter holder
Swing the air filter holder to one side and remove the air filter with the air filter sup-
port.
–
Remove the air filter from the air filter support.
L01632-10
Preparatory work
–
Remove the air filter box lid. (
–
Remove the air filter.
Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Info
Only squeeze the air filter to dry it; never wring it out.
–
Oil the dry air filter with a high quality filter oil.
–
Clean the air filter box.
–
Clean the intake flange and check it for damage and tightness.
L00944-10
Finishing work
–
Install the air filter.
–
Install the air filter box lid. (
x
Main work
–
Mount the clean air filter on the air filter support.
–
Grease the air filter in area
L00943-10
–
Insert both parts together, position them, and fasten them using air filter holder
B
area .
The arrow of marking UP faces up.
Info
If the air filter is not correctly mounted, dust and dirt can enter the engine and
cause damage.
L01632-11
Finishing work
–
Install the air filter box lid. (
1
toward the air filter at position
x
p. 42)
( p. 42)
x
( p. 43)
x
p. 42)
A
.
p. 42)
A B
and detach it at end
1
43
.
in