Husqvarna 125 TC EU Owner's Manual page 57

11 SERVICE WORK ON THE CHASSIS
–
Inject the liquid into the system until it escapes from bore hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container
–
Position the cover with the membrane. Mount and tighten the screws.
L01223-10
6 of the master
4 mm (0.16 in)
55