Brake System; Checking The Free Travel Of The Hand Brake Lever; Adjusting The Basic Position Of The Hand Brake Lever; Checking The Brake Discs - Husqvarna 125 TC EU Owner's Manual

12

BRAKE SYSTEM

12.1

Checking the free travel of the hand brake lever

Warning
Danger of accidents Brake system failure.
–
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit. The front brake can fail due to
overheating. Adjust the free travel on hand brake lever according to specifications.
12.2

Adjusting the basic position of the hand brake lever

12.3

Checking the brake discs

Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized Husqvarna workshop will be glad to help.)
–
Push the hand brake lever forward and check free travel
Free travel of hand brake lever
» If the free travel does not meet specifications:
–
Adjust the basic position of the hand brake lever. (
L01801-10
–
Check the free travel of the hand brake lever. (
–
Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
1
screw .
Info
When the adjusting screw is turned clockwise, the hand brake lever moves
away from the handlebar.
When the adjusting screw is turned counterclockwise, the hand brake lever
moves closer to the handlebar.
The range of adjustment is limited.
L01801-11
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
–
Check the thickness of the front and rear brake discs at several places on the disc to
see if it conforms to measurement
Info
Wear reduces the thickness of the brake disc around the area used by the
brake linings.
Brake discs - wear limit
Front
400257-10
Rear
» If the brake disc thickness is less than the specified value:
–
Change the brake disc.
–
Check the front and rear brake discs for damage, cracking and deformation.
» If the brake disc exhibits damage, cracking or deformation:
–
Change the brake disc.
A .
≥ 3 mm (≥ 0.12 in)
p. 56)
p. 56)
A
.
2.5 mm (0.098 in)
3.5 mm (0.138 in)
56