Preparations For Riding On Wet Sand - Husqvarna 125 TC EU Owner's Manual

7 PREPARING FOR USE
7.5

Preparations for riding on wet sand

–
Change the radiator cap.
–
Mount the dust cover for the air filter.
Dust cover for air filter (77206920100)
Info
Observe the Husky Power fitting instructions.
B00435-01
–
Mount the dust cover for the air filter for sand.
Sand cover for air filter (59006922000)
Info
Observe the Husky Power fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
B00436-01
The recommended carburetor tuning is available from your authorized Husq-
varna workshop.
–
Clean the chain.
–
Mount the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Carefully align bent radiator fins.
–
If used in sand regularly, replace the piston every 10 operating hours.
600868-01
–
Check the radiator cap.
Value on the radiator cap
» If the displayed value does not equal the setpoint value:
600872-10
–
Change the radiator cap.
–
Mount the rain cover for the air filter.
Rain cover for air filter (77206921100)
Info
Observe the Husky Power fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
B00437-01
The recommended carburetor tuning is available from your authorized Husq-
varna workshop.
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine and
cooling system to cool down. In case of scalding, rinse immedi-
ately with lukewarm water.
1.8 bar (26 psi)
17