Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - Husqvarna 125 TC EU Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch

(125 TC EU)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
L01907-10
(250 TC EU)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
B01826-10
Hand brake lever
The hand brake lever is used to activate the front brake.
L01908-10
Throttle grip 1
L01908-11
The kill switch
Possible states
• Kill switch
engine can be started.
• Kill switch
engine stops, and a non-running engine will not start.
B01827-10
1
is fitted on the left side of the handlebar.
1 is fitted on the left side of the handlebar.
1 is located on the right side of the handlebar.
is fitted on the right side of the handlebar.
1 is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed, and the
pressed – In this position, the ignition circuit is interrupted, a running
11