Husqvarna 125 TC EU Owner's Manual page 82

15 TUNING THE ENGINE
–
Take cap 2
the clutch cover.
–
Pull both springs off of the spring insert.
B00056-11
–
Mount the required auxiliary spring
the clutch cover together.
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The recess in spring insert
Info
L01816-10
Screw
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust control cover
, adjusting spring 3 , auxiliary spring
4
and adjusting spring
5
engages in the angle lever.
6
must not be turned as this would worsen the engine characteristic.
4 , and spring insert
3
and slide them into
M5 6 Nm (4.4 lbf ft)
80
5 out of