Plug-In Connection, Ignition Timing Map (125 Tc Eu); Changing The Ignition Curve; Checking The Basic Position Of The Shift Lever - Husqvarna 125 TC EU Owner's Manual

15 TUNING THE ENGINE
15.6

Plug-in connection, ignition timing map (125 TC EU)

15.7

Changing the ignition curve

Change the ignition curve from Performance to Soft.
(125 TC EU)
–
Disconnect plug-in connection
Soft – better rideability
Change the ignition curve from Soft to Performance.
(125 TC EU)
–
Connect plug-in connection
Performance – better performance
Change the ignition curve from Performance to Soft.
(250 TC EU)
–
1
Turn lever to position II. (Figure L01818-10
Soft – better rideability
Change the ignition curve from Soft to Performance.
(250 TC EU)
–
1
Turn lever to position I. (Figure L01818-10
Performance – better performance
15.8

Checking the basic position of the shift lever

Main work
–
Place a cloth beneath the carburetor to soak up emerging fuel.
–
Remove plug
–
Completely drain the fuel.
–
Mount and tighten the plug.
L01657-10
Plug-in connection
Possible states
Performance – The plug-in connection is connected to achieve higher performance.
•
Soft – The plug-in connection is disconnected to achieve better rideability.
•
L01900-10
1
. (Figure L01900-10
1 . (Figure L01900-10
p. 12)
p. 12)
–
Sit on the vehicle in the riding position and determine the distance
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
1
.
1
is located under the fuel tank on the frame.
p. 78)
p. 78)
A
between the
10... 20 mm (0.39... 0.79 in)
( p. 79)
x
78